High Performance Dewpoint Transmitter
For trace moisture measurement of process gases and dry compressed air
SHAW AcuDew, a robust, reliable dewpoint transmitter built of stainless steel construction with a M12 connector. Offering excellent sensitivity, repeatability and speed of response.
- 2-wire, loop powered, 4-20 mA dewpoint transmitter
- Various ranges available: overall range -120 °C to +20 °C (-184 °F to +68 °F) dewpoint
- Accuracy ±2 °C (±3.6 °F) dewpoint
- Output configurable in °C dewpoint, °F dewpoint, ppm(v), ppb(v), g/m³ and lb/MMSCF
- AutoCal feature
- Open/short circuit detection
- Weatherproof rating IP66 (NEMA 4X)
- Tested to withstand pressures up to 35,000kPA (350 bar) for direct connection in to pipelines
SHAW AcuDew is fully compatible with: AcuLoop plug-in signal indicator, panel mount AcuVu with 4-20 mA signal retransmission and fully programmable alarms, AcuTrak single channel inline hygrometer with additional on-board pressure dewpoint calculations and RS485 communications, the SU4 Sample Conditioning Unit and the SWS Weatherproof Sample System.
SHAW AcuDew is easy to install, easy to operate and requires little or no maintenance.
AcuVu Inline Hygrometer
Single channel, panel mount with 4-20 mA retransmission and programmable alarms.
Read more about the AcuVu
AcuTrak inline Hygrometer
Includes additional onboard pressure dewpoint calculations and RS485 communications.
Read more about the AcuTrak
SU4 Sample Conditioning Unit
Combines a pressure regulator, sensor holder and flow meter mounted on a back plate.
Read more about the SU4
